11189694 - Laserfiche WebLink

Home Browse Search

Onsite Permit 555-21-010192-PRMT Page 2 of 3 Schedule or track inspections at www.buildingpermits.oregon.gov Call or text the word "schedule" to 1-888-299-2821 use IVR Number:555003821583 • Schedule using the Oregon ePermitting Inspection App, search"epermitting"in the app store Date issued 5f2122 Expiration date':'5/2/23 Work description MAJ REP 3 BORM' • 9 vy Special Requirements Stake out required: No Pump to drainfield reqd: N/A Filter fabric on top of drain media: Yes Conditions of approval •Dry soil installation only(June 1 —October 1 unless otherwise authorized by the agent). •The system must be installed by the property owner or a licensed sewage disposal business(installer). -Properly decommission the old septic tank and submit appropriate documentation •A failing system must be repaired as soon as possible.Should the repair of this system be delayed,the property owner must notify the agent and provide the reasons for delay,and propose a different completion date. Delays may be cause for formal enforcement action,which may result in civil penalty assessments. •All tanks must be tested for watertightness and have a water-tight riser to the ground surface.Twenty-inch minimum diameter if less than 36-in deep.Thirty-inch minimum diameter if greater than 36-in deep. Maintain access to septic tank for pumping and service. •The system must be installed in the area approved during the site evaluation and in accordance with the construction plan approved by the agent, including any changes made by the agent. •A minimum 18-gauge,green-jacketed tracer wire or green color-coded metallic tape must be placed on top of the effluent sewer or pressure transport pipe from tank to drainfield. Effluent sewer.The effluent sewer must extend at least 5 feet beyond the septic tank before connecting to the distribution unit.It must be installed with a minimum fall of 4 inches per 100 feet and at least 2 inches of fall from one end of the pipe to the other. In addition,there must be a minimum difference of 8 inches between the invert of the septic tank outlet and either the invert of the header to the distribution pipe of the highest lateral in a serial distribution field or the invert of the header pipe to the distribution pipes of an equal distribution absorption field. • 5/2/22:8:59:22AM ONS_OnsitePermit pr