11684436 - Laserfiche WebLink

Home Browse Search

Onsite Permit 555-23-004265-PRMT Page 2 of 3 Schedule or track inspections at www.buildingpermits.oregon.gov Call or text the word "schedule" to 1-888-299-2821 use IVR Number:555085395687 Schedule using the Oregon ePermitting Inspection App, search"epermitting"in the app store tote issued 6d30� ✓ 4 aq as a a ✓ .z �° br �✓�s✓�,��, ✓`' ✓r�.� F - �' r �fr�` � � aS,E�,,��- �� w� )rXpirafiian�r�ai� 6 t /29#24 Work descti"tion REP ;SHOP Ft °EXP APPU ATION 21f�(1�tiv f O4p�°SOU 9OTE $ � ! 3 °''� `` �''�,.. y 3 a�i°� K 0frit,. i Special Requirements Pump to drainfield reqd: N/A Filter fabric on top of drain media: Yes Conditions of approval .This repair permit is for a new septic system for a residential shop. •Use a larger diameter pipe to sleeve the effluent sewer under the driveway. •Properly decommission the old septic tank and submit appropriate documentation. •Dry soil installation only(June 1 —October 1 unless otherwise authorized by the agent). •The system must be installed by the property owner or a licensed sewage disposal business(installer). Vehicular traffic and livestock must be restricted from the system area. •All tanks must be tested for watertightness and have a water-tight riser to the ground surface.Twenty-inch minimum diameter if less than 36-in deep.Thirty-inch minimum diameter if greater than 36-in deep. Maintain access to septic tank for pumping and service. •Meet all required setbacks Effluent sewer.The effluent sewer must extend at least 5 feet beyond the septic tank before connecting to the distribution unit. It must be installed with a minimum fall of 4 inches per 100 feet and at least 2 inches of fall from one end of the pipe to the other. In addition,there must be a minimum difference of 8 inches between the invert of the septic tank outlet and either the invert of the header to the distribution pipe of the highest lateral in a serial distribution field or the invert of the header pipe to the distribution pipes of an equal distribution absorption field. •Header pipe from Distribution or Drop Box must be minimum 4-ft length, level,and bedded. •Each drainfield trench must be level within a tolerance of plus or minus 1-inch. •Serial distribution,each trench bottom to be level and on contour.Use Drop box(es). •For product approval information and manufacturer installation requirements see DEQ website at: http://www.oregon.gov/deq/Residential/Pages/Onsite.aspx •AII work is to conform to OAR 340, Division 71 and 73. Make no changes in system location or specifications without approval by the agent. • 6/30/23:9:06:20AM ONS_OnsitePermitpr