Laserfiche WebLink
Onsite Permit 555-22-009140-PRMT-01 Page 2 of 3 <br /> Schedule or track inspections at www.buildingpermits.oregon.gov <br /> Call or text the word "schedule"to 1-888-299-2821 use IVR Number:555051923648 <br /> Schedule using the Oregon ePermitting Inspection App, search "epermitting"in the app store <br /> Date issue 1118/23 A b l F $ € � <br /> s,� � � � F ��� � �� Expirattondate 1f18f24 <br /> Work description MAJ REPAIR REPL 3 BDRM WITH MANE HM 2 BDRM"SAME FOOTPRINT <br /> Special Requirements <br /> Stake out required: No <br /> Other special rqmt: Decommission old tank submit paper work at time of final inspection <br /> Conditions of approval <br /> •Dry soil installation only(June 1 —October 1 unless otherwise authorized by the agent). <br /> •The system must be installed by the property owner or a licensed sewage disposal <br /> business (installer). <br /> Vehicular traffic and livestock must be restricted from the system area. <br /> •AII roof drains must be directed away from the system <br /> •All tanks must be tested for watertightness and have a water-tight riser to the ground <br /> surface.Twenty-inch minimum diameter if less than 36-in deep.Thirty-inch minimum <br /> diameter if greater than 36-in deep. Maintain access to septic tank for pumping and service. <br /> .Meet all required setbacks <br /> •The system must be installed in the area approved during the site evaluation and in <br /> accordance with the construction plan approved by the agent, including any changes made <br /> by the agent. <br /> •All work is to conform to OAR 340, Division 71 and 73. Make no changes in system location <br /> or specifications without approval by the agent. <br /> •For product approval information and manufacturer installation requirements see DEQ <br /> website at: http://www.oregon.gov/deq/Residential/Pages/Onsite.aspx <br /> -A minimum 18-gauge, green jacketed tracer wire or green color-coded metallic tape must <br /> be placed on top of the effluent sewer or pressure transport pipe from tank to drainfield. <br /> -Header pipe from Distribution or Drop Box must be minimum 4-ft length, level, and <br /> bedded. <br /> .Each drainfield trench must be level within a tolerance of plus or minus 1-inch. <br /> •Serial distribution, each trench bottom to be level and on contour. Use Drop box(es). <br /> 8/1/23:10:09:57AM ONS_OnsitePermitjr <br />