12017356 - Laserfiche WebLink

Home Browse Search

Onsite Permit 555-21-000257-PRMT Page 2 of 3 Schedule or track inspections at www.buildingpermits.oregon.gov Call or text the word "schedule" to 1-888-299-2821 use IVR Number:555053923443 Schedule using the Oregon ePermitting Inspection App, search"epermitting" in the app store Date issued: 1/26/21 Expiration date: 1/26/22 Work description: FIRE-MAJ REPAIR TANK AND DRAINFIELD Special Requirements Groundwater type: Permanent Groundwater depth: N/A Other special rqmt: 55 LINEAR FEET OF DRAIN FIELD WILL BE ADDED TO THE SYSTEM FOR A TOTAL OF 300 LINEAR FEET Conditions of approval •SECURE THE DAMAGED, OPEN TANK WITH BARRICADES, ROPE, OR CAUTION TAPE; POST A WARNING NOTICE . IF NECESSARY,treat the affected area with either a calcium carbonate compound (lime) or other type of sanitizing compound. This repair permit is for a new septic tank and extending the existing drainfield . •Properly decommission the old septic tank and submit appropriate documentation. If there are discharges of sewage or septic tank effluent onto the ground surface or into public waters, the property owner must take immediate steps to minimize the threat to public health and the environment. These steps must include at a minimum: •Vehicular traffic and livestock must be restricted from the system area. .All roof drains must be directed away from the system .All tanks must be tested for watertightness and have a water-tight riser to the ground surface. Twenty- inch minimum diameter if less than 36-in deep. Thirty-inch minimum diameter if greater than 36-in deep. Maintain access to septic tank for pumping and service. •Meet all required setbacks The system must be installed in the area approved during the site evaluation and in accordance with the construction plan approved by the agent, including any changes made by the agent. -A minimum 18-gauge, green-jacketed tracer wire or green color-coded metallic tape must be placed on top of the effluent sewer or pressure transport pipe from tank to drainfield. •Header pipe from Distribution or Drop Box must be minimum 4-ft length, level, and bedded. .All work is to conform to OAR 340, Division 71 and 73. Make no changes in system location or specifications without approval by the agent. -For product approval information and manufacturer installation requirements see DEQ website at: http://www.oregon.gov/deq/Residential/Pages/Onsite.aspx • 1/26/21:11:34:14AM Page 2 of 3 ONS_OnsitePermit_pr