Laserfiche WebLink
4 1,4 LINN COUNTY PLANNING AND BUILDING DEPARTMENT <br /> V-L7,`3, ►d Steve Wills—Director <br /> Rick Goff—Building Official <br /> 0� � Room 114,Linn County Courthouse <br /> PO Box 100,Albany,Oregon 97321 <br /> Phone 541-967-3816, Fax 541-926-2060 <br /> Manufactured Dwelling Plot Plan Permit Application Checklist <br /> Permit number <br /> Map number <br /> The following items are required for plan review and shall be used by Linn County to determine a complete plot <br /> plan and compliance with OAR 918-500-0060. <br /> Ye N/A <br /> 1. Site/Plot plan drawn to scale. ❑ <br /> 2. Approximate elevations at each corner of the lot. El <br /> 3. Location of all cuts and fills on lot. ID Cl, <br /> 4. Location of the manufactured dwelling and all accessory buildings and structures including Ri 0 <br /> walls. r <br /> 5. Setbacks from property lines, lot lines, streets,public sidewalks, easements of record and VI ❑ <br /> other structures on the same or adjacent lots. <br /> 6. Intended finished grade. ❑ r <br /> 7. Location and type of all site drainage including rain drains. ' <br /> 8. Where there is more than 12-inch difference in elevation between two adjacent corners of a ❑ '❑ <br /> site,the plot plan shall include contour lines or shall be submitted with a cross-sectional <br /> drawing of the lot showing the approximate elevations of the lot. <br /> 9, When installed outside a manufactured dwelling park,other information such as location of ❑ 4 <br /> wells,septic tanks,leach lines, petroleum tanks, natural waterways, easements of record <br /> and other information necessary to assure health and safety may be required by Linn <br /> County. <br /> Linn County Specific Requirements <br /> 1. Floodplain Elevation Certificate(Pre and Post Construction) ❑ <br /> 2. Geotechnical Report for Geohazard Areas ❑ tl <br /> Checklist must be completed before plan review start date.Minor changes or notes on submitted plans may <br /> be in blue or black ink. Red ink is reserved for department use only. <br />