Laserfiche WebLink
Oregon Department of Environmental Quality <br /> • The septic tank material is: <br /> E Concrete <br /> ❑ Steel <br /> Ej Plastic <br /> ❑ Fiberglass <br /> In Other(explain) <br /> ❑ Unknown <br /> • Is the septic tank accessible? EYes No <br /> • Septic tank volume in gallons 1,000 <br /> • Tank volume determined by:Check all that apply,add comments below as needed <br /> ❑Permit Records®Measured❑Stamped on Tank❑Other <br /> • Septic tank risers are at ground level ['Yes 12:1No <br /> • Tank appears to be free from defects, leaking and signs of deterioration Yes ❑No <br /> If you answered"No,"please describe the condition of the septic tank below.For example, <br /> evidence of gas corrosion,cracks,leaks,etc. <br /> • Septic tank lid(s)is intact ®Yes ❑No <br /> • Septic tank baffles are intact: Inlet ®Yes ❑No Outlet ®Yes ❑No <br /> • Baffle material-Inlet OPlastic Concrete VMetal Outlet 17Plastic DConcrete IZMetal <br /> Effluent filter is present EYes No <br /> • Effluent filter is free of debris ❑Yes ❑No Not Applicable <br /> • Liquid level in tank relative to invert of outlet At ['Above ❑Below <br /> If above or below invert outlet,please explain: <br /> • Scum layer 6 (inches) Sludge layer 12 (inches) <br /> • Scum and Sludge layer more than 35%of the total tank volume ['Yes IZNo <br /> Indicate where sludge measured from:❑Inlet EMiddle ❑✓Outlet <br /> • Additional Comments: <br /> Lid had minor corrosion around edges, recommend install riser to surface and removing ex lid <br /> 4. Dosing tank/Pump Basin <br /> Dosing tanks use a pump to send effluent to a treatment unit or a soil absorption field. <br /> • The septic system has a dosing tank EYes No <br /> (If"No,"skip the rest of section 4) <br /> • At the time of this evaluation the power was on to test the pump(s): ❑Yes ENo <br /> Page 3 of 8 <br />