My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
Permit - 1274508
Images9
>
Public Works - Permits
>
Building
>
FOR PUBLIC VIEW ON INTERNET
>
COMPLETED FILES - INACTIVE
>
Old Files 5
>
Permit - 1274508
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
3/15/2011 2:32:03 PM
Creation date
9/3/2003 11:26:42 AM
Metadata
Fields
Template:
Permits
Permit Address
7913 MILL CREEK RD SE
Permit City
Aumsville
Parcel Number
082W26C 02700
Permit Type
Permit
Permit Site Number
11950
Permit Doc Type
Permit Document
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
18
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
7913 Mill Creek Road <br />January ll, 1991 <br />Page 1 <br /> <br />Marion County Building Inspection <br /> Dwelling Plan Review <br /> <br />The attached plans have been reviewed for compliance with the <br />State cf Oregon 1990 Edition One and Two Family Dwelling <br />Specialty Code. <br /> <br />The under floor grade shall be cleaned of all vegetation and <br />organic materials. (R-309.3) <br /> <br />Footings sections: 12 in. wide - 1 story; 15 in.- 2 story, <br />18 in. 3 story. Footings shall extend not less than 12 in. <br />below the finish natural grade. (R-303) <br /> <br />Foundation plates shall be bolted to the foundation with <br />minimum 1/2 inch diameter by 10 inch anchor bolts embedded <br />at least 7 inches into concrete or reinforced masonry and <br />spaced not more than 6 feet apart with a minimum of 2 bolts <br />per piece with one bolt within 12 inches of the end of each <br />piece. Figure (R-303) <br /> <br />Ridge board shall be at least i inch nominal thickness and <br />not less in depth than the cut end of the rafter. At all <br />valleys and hips there shall be a valley or hip rafter not <br />less than 2 in. nominal thickness and not less in depth than <br />the cut end of the rafter. (R-702o2) <br /> <br />Ail plywood, when designed to be exposed in outdoor applica- <br />tions shall be of an exterior type, except that plywood roof <br />sheathing exposed to the underside may be of interior type <br />with exterior glue. (R-703.1) <br /> <br />Approval as a result of this plan review or an inspection shall <br />not be construed to be an approval of a violation of the <br />provisions of the dwelling code or of other ordinances of the <br />jurisdiction. Reviews or inspections presuming to give authority <br />to violate or cancel the provisions of the dwelling code or of <br />other ordinances of the jurisdiction shall not be valid. <br /> <br />"APPROVED" only when this sheet, is attached to plans. <br /> <br /> <br />
The URL can be used to link to this page
Your browser does not support the video tag.