Laserfiche WebLink
13 <br /> `, The Filifitte wallforms are shipped on 48"x36"pallets; each pallet containing entirely <br /> one type of wall form. A helpful feature of the Faswall system is that all wallforms are <br /> interchangeable dimensionally. This gives the installer options if he lacks a particular type of <br /> wallform for a given part of the build. For example, the AP unit can be used as a standard wall <br /> form, or a corner wall form (notching required) if necessary. <br /> NOTE: Wallforms are designed to be filled with concrete and are not intended to stand <br /> alone as load bearing blocks. <br /> 2.0 R Value and U Values <br /> Wall Design R-Value* _ U-Value <br /> Concrete filled Faswall wall R-2I .048 <br /> with 3"mineral wool inserts, <br /> interior plaster,exterior stucco <br /> coating <br /> L Concrete filled Faswall wall R-25.5 .039 <br /> with 3"polyisocyanurate foam <br /> inserts, interior plaster, <br /> exterior stucco coating <br /> Concrete filled Faswall wall R-11.8 .085 <br /> with NO additional insulation. <br /> *Th <br /> ermal Mass Factor, although not calculated, adds substantial benefit <br /> 3.0 Designing with Faswall®Wall forms <br /> 3.! General Design Principles <br /> The ideal Faswall design results in little to no cutting of the wallforms. Stack wallforms-insert <br /> rebar-fill with concrete-DONE. By following a few fundamental design rules you can achieve a <br /> 30%reduction in installation labor and eliminate cut wallform waste. <br /> ShelterWorks General Application and Technical Information(GATI)version 2.5 <br />