Laserfiche WebLink
5 <br /> values). The standard wallform is typically supplied with a 3"insulation insert in the cells. This <br /> creates a core size for concrete that is 5"x 8.875". In some situations the engineering will dictate <br /> additional concrete in the core which will require thinner insulation inserts or no inserts. This <br /> vertical core space provides for internal concrete columns which can be reinforced with steel <br /> rebar according to various schedules that can be designed by licensed engineers or architects <br /> and/or is based on local Building Code requirements(e.g. IBC 2007,IRC 2006)or applicable <br /> prescriptive standards. <br /> The AP wallform; part no. 1224 AP. The dimensions of the AP wallform is 24"L x 12"W x <br /> 8"H. This wall form is designed to be field cut in half to form two half size wallforms for use at <br /> window and door openings. Each of the half sized wall forms has a flat smooth surface on one <br /> end to form the openings. The core size with the typical 3"insulation insert is 5"x 8.875"wide <br /> The AP WF is shipped without notches for the horizontal core. The notches for the horizontal <br /> core need to be cut on the jobsite(easily cut with standard saws). The AP WF may also be used <br /> in the same capacity as the standard WF,as the dimensions are exactly the same. <br /> The Corner wallform; part no. 1224 OC (outside corner)and 1224 IC (inside corner) <br /> It is 24"L x 12"W x 8"H and is designed to turn a 90°angle by receiving a standard or half-size <br /> wallform. This wall form has grooves on the side wall into which the tongues lock into from the <br /> intersecting wall form. The core size with typical 3"thick insulation inserts is 5"x 8.875"wide. <br /> The End Block wallform;part no 1224 EB-M and 1224 EB-F. <br /> These WF's are designed for window and door openings.They have a solid smooth end to form <br /> smooth surfaces for the mounting of windows and doors directly to the Faswall composite <br /> material. <br /> The Large Core wallform; Part no. 1224 LC. It is 24"L x 12"W x 8"H and is designed to <br /> provide shear wall strength where required in discrete areas of wall runs. The core size is 20" <br /> by up to 8"thick. The Large Core WF is a versatile tool to solve specific wall engineering <br /> challenges. <br /> ShelterWorks General Application and Technical Information(GATI)version 2.5 <br />