Laserfiche WebLink
Recommend Application Temperature 40°F - 100°F (4°C - 38°C) <br /> Conditions Humidity to 85 <br /> 411, <br /> Typical Cure Times Cure times are temperature, humidity and coating thickness dependent. <br /> 5 min thickness @ 50% Relative Humidity <br /> 40°F(4°C) 70°F(21°C) 100F(38°C) <br /> Pot life 4 hrs. 1 hr. 30 min. <br /> To touch 12- 16hrs. 4hrs. 3hrs. <br /> To handle 36 hrs. 24 hrs. 16 hrs. <br /> To recoat,min 0 0 0 <br /> To recoat, max 30 days 21 days 14 days <br /> Cure for Service 10 days 7 days 5 days <br /> If maximum recoat time is exceeded abrade surface before recoating. <br /> Physical Properties Density, ASTM D1475 <br /> PartA 1.23 gicc(10.31bs/gal) <br /> Part 8 1.14 g/cc (9.5 Ibs/gal) <br /> Mixed,A&B -1.2 g/cc(10.0 lbs/gal) <br /> Cured A&B, spray applied 1 .05 g/cc <br /> Performance Properties' Surface Burning Characteristics,ASTM E84 Flame Spread 25 <br /> Smoke Generation 90 <br /> Durometer Hardness,ASTM D2240 Shore D 72 <br /> Tensile Properties,ASTM D638 Strength, psi 1800 <br /> Modulus,ksi 200 <br /> Flexural Properties, ASTM D790 Strength,psi 2800 <br /> Modulus,ksi 210 <br /> Compression Properties,ASTM D695 Strength,psi 2500 <br /> Lap Shear Strength,ASTM D1002 Strength,psi 1400 <br /> Impact Strength, ASTM D256 Energy Absorbed,J/cm 0.63 <br /> Moisture Absorption,ASTM D570 Immersion,31 days @25°C-wt gain,%2.6 <br /> Smoke&Toxicity Index IMO FTP code Annex.1, pt 2 Toxicity-Pass <br /> Smoke-Primary Deck/floor-Pass <br /> *These are typical values and are not to be construed as specifications <br /> 2 <br />