Laserfiche WebLink
1. Cut film edges neatly and square at a uniform distance of 1/8 inch (3 mm) to 1/16 inch (1.5 mm) <br /> from window sealant. <br /> 2. Edge Seal (to protect from edge corrosion) — None required. 3M Ultra Prestige Window Films do <br /> not contain metals. <br /> 3. Use water and film slip solution on window glass and adhesive to facilitate proper positioning of <br /> film. <br /> 4. Use polyplastic bladed squeegees to insure efficient removal of excess water from underside of <br /> film and to maximize bonding of pressure sensitive adhesive. <br /> 5. Upon completion of film application, allow 30 days for moisture from film installation to dry <br /> thoroughly, and to allow film to dry flat with no moisture dimples when viewed under normal viewing <br /> conditions. <br /> 3.4 CLEANING <br /> A. After application of film, wash film using common window cleaning solutions, including ammonia <br /> solutions, 30 days after application. Do not use abrasive type cleaning agents and bristle brushes to <br /> avoid scratching film. Use synthetic sponges or soft clorths. <br /> B. After installation, remove left over material and debris from Work area. Use necessary means to protect <br /> film before, during, and after installation. <br /> END OF SECTION <br /> SECTION 08 8716 5 OF 5 3M ULTRA PRESTIGE SAFETY FILMS <br /> SECTION 08 8753 3M ULTRA PRESTIGE SECURITY FILMS <br /> JANUARY 2007 <br />