Laserfiche WebLink
remodel and repair situations and to areas where structural design hinders the use of traditional <br /> plumbing installations, such as island sinks. The board discussed limiting the use of AAVs to low rise <br /> residential construction. <br /> At the April meeting the Plumbing Board discussed revision of the previous ruling and recommended <br /> changing the scope of the ruling to remove the limitation of three (3) AAVs per building and one (1), <br /> AAV per individual plumbing fixture. The Plumbing Board recommended instead that the scope <br /> allow each valve to function as a vent for a maximum of three(3) fixtures, and may function as a vent <br /> for up to three (3) fixtures only when those fixtures served are part of a plumbing fixture grouping <br /> such as a bathroom, kitchen or laundry area on the same floor level within the dwelling. Also, the <br /> Plumbing Board recommended that the product standards in the ruling be revised to the latest 2009 <br /> Editions. <br /> The Residential Structures Board (Residential Board) evaluated the scientific and technical facts of <br /> the proposed alternative method ruling at its Dec. 11, 2007 regular meeting. The Residential Board <br /> reviewed and approved the scientific and technical facts as they apply to AAVs used in residential <br /> structures subject to the Oregon Residential Specialty Code. <br /> Discussion: <br /> Technical discussion: <br /> Under Oregon law, when the division considers making an alternate method ruling on a method of <br /> construction, it must consider "standards and interpretations published by the body that promulgates <br /> any nationally recognized model code adopted as a specialty code of this state." ORS 455.060. <br /> The International Code Council (ICC), through its Evaluation Services and in the text of the <br /> International Plumbing code (IPC), recognizes AAVs and their product performance standards. The <br /> IPC indicates that with adequate conditions upon installation and use, AAVs are effective. In terms of <br /> authoritativeness, several promulgated ICC model codes form the basis of the state building code in <br /> Oregon. AAVs are also listed by the International Association of Plumbing and Mechanical Officials <br /> (IAPMO),which promulgates the model plumbing code adopted by Oregon. <br /> In addition to the standards published by entities that supply Oregon's model codes, several <br /> authoritative sources have published standards that recognize AAVs as a suitable construction <br /> material. One authoritative source is the American Society of Sanitary Engineers (ASSE), which <br /> published national consensus performance standards Nos. 1050-2009' and 1051-2009". ASSE <br /> standards require testing for factors such as endurance, air tightness, pressure containment, and frost <br /> closure. AAVs meet these national consensus standards for performance. Also,AAVs meet the <br /> national consensus standards for materials contained in NSF Standard 14-2009..' <br /> Other sources that provide standards for AAVs include the Canadian Standards Association(CSA) <br /> and Underwriters Laboratories (UL). These listing organizations, in addition to the National <br /> Sanitation Foundation (NSF) and ASSE standards, are used for approving other plumbing products in <br /> Oregon. <br /> Facts: <br /> As approved by the Oregon State Plumbing Board,the following scientific and technical facts apply <br /> to AAVs as an alternate method: <br /> • AAVs are venting devices designed for use with plumbing systems. AAVs are gravity- ,lJ <br /> activated devices installed close to plumbing fixtures or on stack vents. Because AAVs are <br /> Page 2 of 4 <br />