13007245 - Laserfiche WebLink

Home Browse Search

Pool Cover Operation ' Before operating the pool cover • Inspect and make sure no bathers or pets are in or around the pool. • Inspect and remove any obstructions (pool toys,towels,ladders patio furniture etc.). • Clear and remove any water or debris from on top of the pool y. cover (leaves, twigs, etc.). Use a pool brush and pool cover i pump per the manufacturer's instructions. '1 • Tin-plug and then remove the pool cover pump from the pool cover and the recreational area before operating the pool cover or swimming in the pool. • See page 7 for addition Safety instructions. 1 Operating the pool cover Based on your choice of accessories your pool cover will be con ``"' trolled by either a momentary keyed switch or a Touch-Sensitive Touch pad mounted in full view of the pool. ev • Key switch (controller): insert the key,turn and hold the key in 1 the open or close position until the pool cover has completed the operation, then release the key. The operation can be 'P C stopped at any time by simply releasing the key. Visually monitor the operation of the pool cover for safety or problems as you hold the key. .t u • Touch Pad (controller): o Input your custom four-digit Personal User Code "*.- (see Programming and Operating intructions) o Press either the"Open" or"Close"key and hold it down. o To lock the Touch pad, press any numeric key. If the Touch pad is left active for more than 30 seconds, the Touch pad will automatically lock. Note: S `' • When opening the pool cover, check for residual water on top of r the pool cover that may build up as the pool cover is opening. t' z! • When water accumulates, stop the pool cover by releasing the controller. Place the pool cover pump on the pool cover to ) R <„ remove the accumulated water. -r, + • Unplug and then remove the pool cover pump from the pool ! cover after the water is gone. • Resume opening the pool cover,when fully open, release the 'I n � y controller. c POOL COVER SPECIALISTS@ 2016 11`