Laserfiche WebLink
DATE/TIME <br />TYPE <br />UGB: <br /> <br /> MANUFACTURED DWELLING PERMIT <br /> : 03/22/98 10:21 <br /> : Not in table. <br />SITE: <br /> <br />(R-214,1) <br /> <br />PERMIT NO 98-01950 <br />STATUS ISSUED <br />ISSUED 02/22/1998 <br />TO EXPIRE 09/19/1998 <br />PAGE 3 <br /> <br />A minimum 3' x 3' landing shall be required on each side of <br />an egress door. The floor or landing shall not be more <br />than one and one-half inches lower than the top of the <br />threshold. (R-212) Exception: The landing on the <br />exterior side of an exterior doorway shall not be more than <br />8 and 1/4 inches below the top of the threshold. <br />Porches, balconies or raised floor surfaces located more <br />than 20 in. above the floor or grade shall have guarddail <br />not less than 26 inches in height. Required guardrail shall <br />have intermediate rails or ornamental closures which will <br />not allow passage of an object 6 in. or more in diameter, <br />Horizontal spacing between the vertical members in required <br />guardrails shall be a maximum of 4 inches at the nearest <br />point between the members. (R-214.2) <br /> <br /> <br />