Laserfiche WebLink
DATE/TIME <br />TYPE <br />UGB: <br /> <br /> MANUFACTURED DWELLING PERMIT <br /> : 06/22/98 11:07 <br /> : Not in table, <br />SITE: <br /> <br />10. <br /> <br /> PERMIT NO 98-05106 <br /> STATUS ISSUED <br /> ISSUED 06/23/1998 <br /> TO EXPIRE 12/20/1998 <br /> PAGE 3 <br />portion of handrails shall be not more than 2 5/8 inches in <br />cross-sectional dimension, or the shape shall provide an <br />equivalent gripping surface. Handrails shall be mounted <br />between a minimum of 20 inches and a maximum of 38 inches. <br />They shall be continuous the full length of the stairs, <br />Ends shall be returned or shall terminate in newel posts or <br />safety terminals. <br />(R-214.1) <br />A minimum 3' x 3' landing shall be required on each side of <br />an egress door. The floor or landing shall not be more <br />than one and one-half inches lower than the top of the <br />threshold. (R-212) Exception: The landing on the <br />exterior side of an exterior doorway shall not be more than <br />8 and 1/4 inches below the top of the threshold. <br />Porches. balconies or raised floor surfaces located more <br />than 30 in, above the floor or grade shall have guardrail <br />not less than 36 inches in height. Required guardrail shall <br />have intermeqiate rails or ornamental closures which will <br />not allow passage of an object 6 in. or more in diameter, <br />Horizontal spacing between the vertical members in required <br />guardrails shall be a maximum of 4 inches at the nearest <br />point between the members. (R-214~2) <br /> <br /> <br />