Laserfiche WebLink
DATE/TIME <br />TYPE <br />UGB: <br /> <br /> MANUFACTURED DWELLING PERMIT <br /> : 08/11/98 12:38. <br /> : Not in table, <br />SITE: FD <br /> <br />10. <br /> <br /> PERMIT NO 98-05615 <br /> STATUS ISSUED <br /> ISSUED 08/11/1998 <br /> TO EXPIRE 02/07/1999 <br /> PAGE 3 <br />portion of handrails shall be not more than 2 5/8 inches in <br />cross-sectional dimension, or the shape shall provide an <br />equivalent gripping surface, Handrails shall be mounted <br />between a minimum of 30 inches and a maximum of 38 qnches. <br />They shall be continuous the full length of the stairs. <br />Ends shall be returned or shall terminate in newel posts or <br />safety terminals, <br />(R-214.1) <br />A minimum 2' x 3' landing shall be required on each side of <br />an egress door. The floor or landing shall not be more <br />than one and one-half inches lower than the top of the <br />threshold. (R-212) Exception: The landing on the <br />exterior side of an exterior doorway shall not be more than <br />8 and 1/4 inches below the top of the threshold, <br />Porches, balconies or raised floor surfaces located more <br />than 20 in. above the floor or grade shall have guardrail <br />not less than 36 inches in height. Required guardrail shall <br />have intermediate rails or ornamental closures which will <br />not allow passage of an object 6 in, or m~re in diameter. <br />Horizontal spacing between the vertical members in required <br />guardrails shall be a maximum of 4 inches at the nearest <br />point between the members, (R-214.2) <br /> <br /> <br />