Laserfiche WebLink
DATE/TIME <br />TYPE <br />UGB: DT <br /> <br /> MANUFACTURED DWELLING PERMIT <br /> : 12/22/99 ]6:14 <br /> : New Manufactured Dwellqng <br />SITE: <br /> <br />10, <br /> <br /> PERMIT NO 98-05690 <br /> STATUS ISSUED <br /> ISSUED 01/07/1999 <br /> TO EXPIRE 07/06/1999 <br /> PAGE 3 <br />three risers. The handgrip portion of handrails shall be <br />not more than 2 5/8 inches in cross-sectional dimension, or <br />the shape shall provqde an equivalent gripping surface. <br />Handrails shall De mounted between a minimum of 30 qnches <br />and a maximum of 38 inches, They shall be continuous the <br />full length of the stairs, Ends shall be returned or shall <br />terminate in newel posts or safety termqnals, (R-214.1) <br />A minimum 3' x 3' landqng shall be required on each side of <br />an egress door. The floor or landing shall not be more <br />than one and one-half inches lower than the top of the <br />threshold. (R-212) Exception: The landing on the <br />exterior side of an exterior doorway shall not be more than <br />8 and 1/4 qnches below the top of the threshold. <br />Porches. balconies or raised floor surfaces located more <br />than 30 in, above the floor or grade shall have guardraql <br />not less than 36 inches in height, Required guardrail shall <br />have intermediate rails or ornamental closures which will <br />not allow passage of an object 6 qn. or more in diameter. <br />Horizontal spacing between the vertical members in required <br />guardrails shall be a maximum of 4 inches at the nearest <br />point between the members, (R-214.2) <br /> <br /> <br />