Laserfiche WebLink
DATE/TIME <br />TYPE <br />UGB: <br /> <br /> MANUFACTURED DWELLING PERMIT <br /> : 09/02/99 12:57 <br /> : New Manufactured Dwellqng <br />SITE: <br /> <br /> PERMIT NO <br /> STATUS <br /> ISSUED <br /> TO EXPIRE <br /> PAGE <br /> exceed 1 and 1/2 inches, The greatest riser height shall <br /> not exceed the smalleat by more than 2/8 inch, (R-213,1) <br />9. Handrails meeting the following requirements shall be <br /> provided on at least one side of stairways of more than <br /> three risers, The handgrip portion of handrails shall be <br /> not more than 2 5/8 inches in cross-sectional dimension, or <br /> the shape shall provide an equivalent gripping surface. <br /> Handrails shall be mounted between a minimum of 20 inches <br /> and a maximum of 38 inches. They shall be continuous the <br /> full length of the stairs, Ends shall be returned or shall <br /> terminate in newel posts or safety terminals. (R-214,1) <br />10, A minimum 3' x 3' landing shall be required on each side of <br /> an egress door, The floor or landing shall not be more <br /> than one and one half inches lower than the top of the <br /> threshold, (R-212) Exception: The landing on the <br /> exterior side of an exterior doorway shall not be more than <br /> 8 and 1/4 inches below the top of the threshold. <br />11. Porches, balconies or raised floor surfaces located more <br /> than 30 in. above the floor or grade shall have guardrail <br /> not less than 36 inches in height. Required guardrail shall <br /> have intermediate rails or ornamental closures which will <br /> not allow passage of an object 6 in, or more in diameter, <br /> Horizontal spacing between the vertical members in required <br /> guardrails shall be a maximum of 4 inches at the nearest <br /> point between the members. (R-214.2~ <br /> <br />99-06586 <br />ISSUED <br />09/02/1999 <br />02/29/2000 <br />2 <br /> <br /> <br />