Laserfiche WebLink
A. Separate and handle general construction waste in <br />accordance with the Waste Management Plan. <br />B. Separate for recycling and place in designated <br />containers the following metal waste in accordance with the <br />Waste Management Plan and local recycler standards: (EDIT <br />LIST TO SUIT PROJECT] steel, iron, galvanized steel, <br />galvanized sheet steel, stainleas steel, aluminum, copper, <br />zinc, lead, brass, and bronze. <br />C. Fold up metal banding, flatten, and place in <br />designated area. <br />D. Use the least toxic primers and sealers necessary to <br />comply with the requirements of this aection. <br />SPECIFIC SECTIONS <br />[SECTIONS FOR WHICH THE SAME ADDITIONAL PROVISIONS ARE APPLICABLE <br />ARE SHOWN GROUPED. INSERT THE FOLLOWING ADDITIONAL PROVISIONS <br />UNDER PART 3 EXECUTION, WASTE MANAGEMENT~ UNLESS OTHERWISE NOTED.] <br />05120 STRUCTIIRAI, STEEL <br />05500 METAL FABRICATIONS <br />05510 METAL STAIRS <br />ENVIRONMENTAL CONSIDERATIONS <br />[THIS IS AN APPROPRIATE LOCATION FOR ADDITIONAL LANGUAGE <br />PERTAINING TO ENVIRONMENTAL ISSUES BEYOND THE SCOPE OF THIS <br />WASTESPEC, SUCIi AS THE FOLLOWING PROVISION: <br />-- The work of thia section shall be manufactured or <br />fabricated from metals with x$ recycled content. [EDIT To <br />SUIT PROJECT.] <br />[DESIGNING TO ACCOMMODATE EARLY INSTALLATION AND PROTECTION OF <br />PERMANENT STAIRS, HANDRAILS, AND TREADS MAY AVOID NECESSITY FOR <br />TEMPORARY WORK.] <br />END OF DIVISION <br />