Laserfiche WebLink
• <br /> z f <br /> Oregon Department of Environmental Quality <br /> • The septic tank material is: <br /> I Concrete <br /> ❑ Steel <br /> Plastic <br /> ❑ Fiberglass <br /> ❑ Other(explain) <br /> ® Unknown <br /> • Is the septic tank accessible? ®Yes ❑No <br /> • Septic tank volume in gallons 1,000 <br /> • Tank volume determined by: Check all that apply,add comments below as needed <br /> ®Permit Records®Measured❑Stamped on Tank Other <br /> • Septic tank risers are at ground level <br /> Yes ❑No <br /> • Tank appears to be free from defects,leaking and signs of deterioration®Yes ONo <br /> If you answered"No,"please describe the condition of the septic tank below.For example, <br /> evidence of gas corrosion,cracks,leaks,etc. <br /> • Septic tank lid(s)is intact ®Yes ❑No <br /> • Septic tank baffles are intact: Inlet ®Yes ❑No Outlet ®Yes ❑No <br /> • Baffle material-Inlet[Plastic OConcrete EMetal Outlet k Plastic OConcrete EMetal <br /> Effluent filter is present ❑Yes ENo <br /> • Effluent filter is free of debris DYes ❑No Not Applicable <br /> • Liquid level in tank relative to invert of outlet At ❑Above ❑Below <br /> If above or below invert outlet,please explain: <br /> • Scum layer 1 (inches) Sludge layer 6 (inches) <br /> • Scum and Sludge layer more than 35% of the total tank volume DYes E]No <br /> Indicate where sludge measured from: ❑Inlet ❑Middle DOutlet <br /> • Additional Comments: <br /> 4. Dosing tank/Pump Basin <br /> Dosing tanks use a pump to send effluent to a treatment unit or a soil ab•orption field. <br /> • The septic system has a dosing tank DYes ONo <br /> (If"No,"skip the rest of section 4) <br /> • At the time of this evaluation the power was on to test the pump(s): D -s ❑No <br /> Page 3 of 8 <br />