12380180 - Laserfiche WebLink

Home Browse Search

Onsite Permit 555-24-006356-PRMT Page 2 of 3 Schedule or track inspections at www.buildingpermits.oregon.gov Call or text the word "schedule" to 1-888-299-2821 use IVR Number:555010169055 Schedule using the Oregon ePermitting Inspection App,search"epermitting"in the app store �( io Q d ' 7 a v, P 'h a p U 9 ESj1 lJia e'm q 5�'Ste sued 8/29 4� � � � � .� s "�' � � ' � Zelf, a 46 :esanptton ODI INFI F Ip` -ADDITION eS 13 HO To RE fAW Min depth: 18 in. Capping fills-min depth of fill material: N/A Special Requirements Groundwater type: Temporary Groundwater depth: N/A Pump to drainfield reqd: N/A Filter fabric on top of drain media: Yes Other special rqmt: Applicant is reconfiguring and adding lines to the existing system and moving the existing distribution box to meet setbacks to an addition on the dwelling(no proposed increase in flow) Conditions of approval: •Dry soil installation only(June 1 —October 1 unless otherwise authorized by the agent). •The system must be installed by the property owner or a licensed sewage disposal business(installer). •Vehicular traffic and livestock must be restricted from the system area. •All roof drains must be directed away from the system -Meet all required setbacks •The system must be installed in the area approved during the site evaluation and in accordance with the construction plan approved by the agent, including any changes made by the agent. All work is to conform to OAR 340, Division 71 and 73. Make no changes in system location or specifications without approval by the agent. •For product approval information and manufacturer installation requirements see DEQ website at: http://www.oregon.govideq/Residential/Pages/Onsite.aspx •A minimum 18-gauge,green jacketed tracer wire or green color-coded metallic tape must be placed on top of the effluent sewer or pressure transport pipe from tank to drainfield. Effluent sewer.The effluent sewer must extend at least 5 feet beyond the septic tank before connecting to the distribution unit. It must be installed with a minimum fall of 4 inches per 100 feet and at least 2 inches of fall from one end of the pipe to the other. In addition,there must be a minimum difference of 8 inches between the invert of the septic tank outlet and either the invert of the header to the distribution pipe of the highest lateral in a serial distribution field or the invert of the header pipe to the distribution pipes of an equal distribution absorption field. •Header pipe from Distribution or Drop Box must be minimum 4-ft length,level,and bedded. •Each drainfield trench must be level within a tolerance of plus or minus 1-inch. •Maximum length of an individual trench is 150-feet. •Equal distribution,all trench bottoms must be at the same elevation.Use Distribution box(es). 8/29/24:11:14:15AM ONS_OnsitePermitj,r