12985313 - Laserfiche WebLink

Home Browse Search

2010 Oregon Manufactured Owelfng Installation Specialty Code or evidence that a material or method does not the exterior wall and do not require additional conform to the requirements of this code, or in support. order to substantiate claims for alternative (9) Nonbearing partitions, except when such materials or methods; the building official shall partitions create habitable rooms. have the authority to require tests as evidence of (10) Replacement or repair of siding not required compliance to be made at no expense to the to be fire-resistive. municipality. Test methods shall be as specified (11)Retrofitted insulation. in this code or by other recognized test (12)Masonry repair. standards, In the absence of recognized and (13) Porches and decks, where the floor or deck accepted test methods, the building official shall is not more than 30 in. above adjacent approve the testing procedures. Tests shall be grade at any point and where in the case of - - performed-by an-approved-agencyReports-of - a covered-porch-the-covered-portion-of-the-- --- such tests shall be retained by the building porch does not come closer than 3 ft. to official for the period required for retention of property lines. public records. (14)Gutters and downspouts. 1-4 Permits. (15)Door and window replacements (where no 1-4.1 Permits Required. Any person who structural member is changed). intends to commence work which is regulated by (16) Re-roofing, where replacement or repair of this code, or to cause any such work to be done, roofing does not exceed 30 percent of the shall first make application to the building official required live load design capacity and the and obtain the required permit. Multiple permits roof is not required to be fire-resistive, maybe required when the Exceptions: q proposed work (1)Permits for re-roofing are required for involves two or more code areas (i.e., structural, structures in wildfire hazard zones as electrical, plumbing, or mechanical). 1-4.2 Work Exempt from Permit. Exemption provided in the Oregon Residential Specialty Code, Section R325; and from permit requirements of this code shall not be deemed to grant authorization for any work to (2)OregonStructures fallingdwithin theiscope of Residential Specialty Code, be done in any manner in violation of the provi- Section R317.2. sions of this code or any other laws or (17)Plastic glazed storm windows. ordinances of the municipality. Permits shall not (18) Framed-covered nonhabitable accessory be required for the following: buildings not more than 500 square feet in (1) Nonhabitable one-story detached accessory area, one story in height and not closer than structures used as tool and storage sheds, 3 ft. to a property line, where the structure is playhouses and similar uses, provided the composed of a rigid framework that floor area does not exceed 200 square feet supports a fabric membrane. and a height of 10 ft. measured from the 1-4.3 Application for Permit. To obtain a finished floor level, to the average height of permit, the applicant shall first file an application the roof surface. in writing on a form furnished for that purpose. (2) Except for barriers around swimming pools, The application shall: fences not over 6 feet high. (3) Retaining walls that are not over 4 ft. in (1) Identify and describe the work to be covered height measured from the bottom of the footing by the permit for which application is made; to the top of the wall, unless supporting a (2) Describe the land on which the proposed surcharge. work is to be done by legal description, (4) Concrete sidewalks, slabs, platforms and street address or similar description that will driveways. readily identify and definitely locate the (5) Painting, papering, tiling, carpeting, cabinets, proposed building or work; counter tops interior wall, floor or ceiling (3) Indicate the use and occupancy for which covering and similar finish work. the proposed work is intended; P (6) Swings and other playground equipment (4) Be accompanied by construction documents �Y•' (7) Patio and porch covers not over 200 square and other information as required in Section ft. and supported by an exterior building wall. 1-5.1; (8) Window awnings supported by an exterior wall which do not project more than 54 in. from (5) State the valuation of the proposed work;