Laserfiche WebLink
Backstop NT For Use Beneath Claddings Other Than Dryvit EIFS Specifications DS200 <br /> r' 3.06 PROTECTION <br /> A. The Dryvit materials and the project shall be protected from damage and inclement weather until dry. <br /> 1. The Dryvit Backstop NT—Texture, Smooth, or Spray Backstop NT can be exposed to weather up to 180 <br /> days to provide sufficient time for installation of the cladding. Inspect the surface of the Backstop NT for <br /> any damage, cracks, voids or other detrimental conditions and repair prior to installation of the cladding. <br /> The Backstop NT surface shall be clean,dry and free of any detrimental conditions that may affect <br /> adhesion. <br /> DISCLAIMER <br /> Information contained in this specification conforms to standard detail and product recommendations for the <br /> installation of the Dryvit Backstop NT products as of the date of publication of this document and is presented in <br /> good faith. Dryvit Systems, Inc. assumes no liability, expressed or implied, as to the architecture,engineering or <br /> workmanship of any project. To ensure that you are using the latest, most complete information, contact Dryvit <br /> Systems, Inc. at: <br /> One Energy Way <br /> West Warwick, RI 02893 <br /> 401-822-4100 <br /> DrWt Systems,Inc. <br /> One Energy Way For more information on Drvvit Systems or continuous Insulation, <br /> West Warwick,RI 02893 visit these links. dryvit r. <br /> (800)556-7752 <br /> kilie wswe drwit com <br /> 8 <br /> Printed in USA Issued0539-1] <br /> SnDinfunSystems lm]0no <br />