13007268 - Laserfiche WebLink

Home Browse Search

AquaFlash System D5494 Mixing Job Conditions Storage AquaFlash Liquid is ready for use Air and substrate temperature for AquaFlash Liquid shall be stored at after an initial spin-up using a drill application of AquaFlash System a minimum of 40°F (40°C) and a with paddle mixer. DO NOT ADD must be 40 °F(40°C)minimum to maximum of 100°F (38°C) in tightly CEMENT OR ANY OTHER 100 °F (38 °C) maximum and must sealed containers protected from ADDITIVES. remain so for a minimum of 12 weather and out of direct sunlight. hours or until dry. Cool, damp Cautions and Limitations Application Procedure conditions may require longer drying Using a brush or 3/4 in (19 mm) nap time. Temporary protection shall be • Avoid applying AquaFlash System roller, apply a liberal coat of provided at all times until in direct sunlight. Always work on AquaFlash Liquid material to the membrane, adhesive, base coat, the shady side of the wall or substrate surface. Immediately finish and permanent flashings, protect the area with appropriate embed the AquaFlash Mesh or sealants, etc.are completed to shading material. AquaFlash Corners into the wet • Apply the AquaFlash System to protect the wall from weather and material. Add additional AquaFlash other damage. acceptable substrates only. Liquid material and smooth out to Technical and Field Services remove any wrinkles and fully Clean Up Available on request. embed the mesh. Allow to set for a Clean tools with water while minimum of 15 minutes,apply a AquaFlash Liquid is still wet. second liberal coat of AquaFlash Liquid and smooth out to ensure a uniform continuous film free of voids, pinholes or other discontinuities. Joints in the AquaFlash mesh should overlap a minimum of 2 in (51 mm). Le Dryvit Systems,Inc. Information contained in this product sheet conforms to the standard One Energy Way detail recommendations and specifications for the installation of Dryvil West Warwick,RI 02893 Systems,Inc.products as of the date of publication of this document and 1 •1 (800)556-7752 is presented in good faith.Dryvit Systems,Inc.assumes no liability, drY /'T vrww.dryvit.com expressed or implied,as to the architecture,engineering or workmanship 1 Y 1 of any project.To ensure that you are using the latest,most complete information,contact Dryvit Systems,Inc. For more information on Dryvit Systems or Continuous Insulation,visit these links. Printed in USA. Issued 10.04-16 2 aoryua Systems,Inc 2005