Laserfiche WebLink
DATE/TIME <br />TYPE <br />UGB: <br /> <br /> MANUFACTURED DWELLING PERMIT <br /> : 09/I8/98 15:26 <br /> : New Manufactured Dwelling <br />SITE: <br /> <br />10. <br /> <br />11. <br /> <br /> PERMIT NO 98-05227 <br /> STATUS ISSUED <br /> ISSUED 09/18/1998 <br /> TO EXPIRE 02/17/1999 <br /> PAGE 3 <br />portion of handrails shall be not more than 2 5/8 inches ~n <br />cross-sectional dimension, or the shape shall provide an <br />equivalent gripping surface. Handrails shall be mounted <br />between a minimum of 20 inches and a maximum of 28 inches. <br />They shall be continuous the full length of the stairs. <br />Ends shall be returned or shall terminate in newel posts or <br />safety terminals, <br />(R-214.1) <br />A minimum 2' x 2' landing shall be required on each side of <br />an egress door. The floor or landing shall not be more <br />than one and one-half inches lower than the top of the <br />threshold, (R-212) Exception: The landing on the <br />exterior side of an exterior doorway shall not be more than <br />8 and 1/4 inches below the top of the threshold. <br />Porches, balconies or raised floor surfaces located more <br />than ~0 in. above the floor or grade shall have guardrail <br />not less than 26 inches in height. Required guardrail shall <br />have intermediate rails or ornamental closures which will <br />not allow passage of an object 6 in. or more in diameter. <br />HoriZontal spacing between the vertical members in required <br />guardrails shall be a maximum of 4 inches at the nearest <br />point between the members. (R-214.2) <br />Approved as a replacement dwelling, Existing residence must <br />be removed, demolished or converted to an allowable non- <br />residential use within three (2) months of the occupancy of <br />the replacement dwelling, <br /> <br /> <br />