Laserfiche WebLink
DATE/TIME <br />TYPE <br />UGB: <br /> <br /> MANUFACTURED DWELLING PERMIT <br /> 03/19/99 16:19 <br /> New Manufactured Dwelling <br />SITE: FD <br /> <br />10. <br /> <br />11. <br /> <br /> PERMIT NO 98-08084 <br /> STATUS ISSUED <br /> ISSUED 02/19/1999 <br /> TO EXPIRE 09/15/1999 <br /> PAGE 3 <br />three risers, The handgrip portion of handrails shall be <br />not more than 2 5/8 inches in cross-sectional dimension, or <br />the shape shall provide an equivalent gripping surface. <br />Handrails shall be mounted between a minimum of 30 inches <br />and a maximum of 38 inches. They shall be continuous the <br />full length of the stairs. Ends shall be returned or shall <br />terminate in newel posts or safety terminals, (R-214.1) <br />A minimum 3' x 2" landing shall be required on each side of <br />an egress door. The floor or landing shall not be more <br />than one and One-half inches lower than the top of the <br />threshold. (R-212) Exception: The landing on the <br />exterior side of an exterior doorway shall not be more than <br />8 and 1/4 inches below the top of the threshold, <br />Porches. balconies or raised floor surfaces located more <br />than 30 in. above the floor or grade shall have guardrail <br />not less than 36 inches in height. Required guardrail shall <br />have intermediate rails or ornamental closures which will <br />not allow passage of an object 6 in. or more in diameter, <br />Horizontal spacing between the vertical members in required <br />guardrails shall be a maximum of 4 inches at the nearest <br />point between the members. (R-214.2) <br />Approved as a replacement dwelling. Existing residence must <br />be removed, demolished or converted to an allowable non- <br />residential use within three (3) months of the occupancy of <br />the replacement dwelling, <br /> <br /> <br />