Financial- Invoices Misc. (1 - 2 Files)

Home Browse Search

Steve Ward Apri128, 1999 Page 3 Submit one set of revised plans to all utility companies. All costs for relocation of existing utilities shall be borne by the developer. The consulting engineer shall be responsible for providing all surveying services necessary to stake the project prior to construction and to prepare the as-built drawings when the project is complete. Construction must meet City of Salem Standard Construction Specifications as to materials and workmanship. Please note that the City has a standard requiring installation of water services by the developer. This Standard #410 (for 5/s" and 1" meters), #419 (for 1%2" and 2" meters), or #506 (for meters larger than 2") is available at the Public Works Deparkment, Room 325. Water used on this project will not be furnished by the City of Salem. Water may be purchased and obtained through a metered fire hydrant convenient to the construction site. Authorization and arrangements can be made by calling the Development Services Section at (503) 588-6211, 24 hours in advance of your needs. Water may also be purchased from a bulk water station. All tapping, installation'of valves on existing municipal pressurized water mains, chlorination and purity tests must be done by City forces. An estimate of expected costs for the above work may be requested by calling the Development Services Section at (503) 588-6211. A deposit for the full amount established must be received by the Public Works Department prior to City forces performing the work. Any additional charges for tapping or chlorination must be paid prior to closing of the project. ' Per Salem Revised Code Section 77.120, the engineer shall, prior to final acceptance and the start of the one-year warranty period, furnish five rolled sets of good quality blackline prints of as- built drawings for each construction phase, i.e., sewer, water, storm drain, and/or street improvement, and all required easements. Criteria for acceptable "as-built" drawings may be obtained by calling the Construction Inspection Section at (503) 588-6211. Our "Acceptance for Completion" letter will state the dates of the one-year warranty period. At the close of the successful warranty period, you will receive a letter of "Final Acceptance." Check valves must be installed to Public Works Department Standards. Devices must be tested by a certified tester and reported to 1410 20th Street SE, Building #2, Salem, Oregon 9730~, before protection is recognized. For infQrmation, call (503) 588-6063. The system will not be activated until our receipt of this data. PD:P:~986020.,~ee