8658547 - Laserfiche WebLink

Home Browse Search

Onsite Permit 555-19-000561-PRMT Page 4 of 5 Schedule Inspections online at www.buildingpermits.oregon.gov or by calling: 1-888-299-2821 or 503-588-5147 IVR Number:555074146101 Date issued:2/5/19 Expiration date 215/20 When calling for an inspection:use Workdescription M REP 'REPLSANDFILTER t �ATl`UNIT FOR 4 BDRM3 SFD ...,asVYA�... ras�,...... .. a.�, .:.._._... �...... Conditions of approval the ground surface or above. The riser lid must be gasketed and securely fastened. ELECTRICAL COMPONENTSWILL BE REQUIRED for the ATT Unit. The electrical wiring to the pump and alarm must be installed in accordance with the appropriate Electrical Code. Relocation and alteration of electrical components must be done under a Marion County Electrical Permit and must be inspected and approved by a Marion County Electrical Inspector. The work must be left uncovered and accessible for inspection. OBSERVE ALL SETBACKS AND SEPARATION DISTANCES as required by the Department of Environmental Quality rules. A copy of the DEQ setback requirements is available in our office and online at http://www.oregon.gov/deq/Residential/Pages/Onsite.aspx under Rules: Division 71: Table 1. MAINTAIN PERMANENT ACCESSto septic tank for pumping and service. The septic tank should be pumped and inspected by a licensed septic tank service before sludge and scum accumulations reach 30% of the tank liquid operating volume. Pumping every 3 to 5 years is an average interval. The septic tank is a reservoir for the solid materials in the sewage waste stream. Excessive accumulation of these solid materials in the septic tank will cause the solids to wash out of the tank and into the drainfield. This will cause irreversible damage to the drainfield and will eventually lead to a system failure. 2/5/19:3:17:37PM Page 4 of 5 ONS_OnsitePermit�r L